The ANWETECH AT-SH-T02 2-in-1 Smoke & Heat Detector Tester is a portable testing tool designed for functional testing of installed smoke detectors and heat detectors during inspection, commissioning, maintenance and acceptance work.
The tester combines electronic smoke generation, electric heat testing and a blow/fan function in one tester head. A sectional stainless-steel pole system provides standard assembled lengths of 2.5 m or 3.5 m, while the rechargeable battery system supports portable field operation.
The AT-SH-T02 is designed to help technicians verify that installed fire detectors respond correctly to a controlled smoke or heat stimulus and that the connected fire alarm system receives and processes the resulting alarm signal.
For smoke detector testing, the unit uses atomized detector test fog liquid rather than an open-flame smoke source. For heat detector testing, the tester provides an outlet temperature above 80°C. After smoke testing, the integrated blow/fan function can be used to disperse residual test fog around the detector and reduce the possibility of repeated alarms.The tester is intended for use in non-explosion-proof areas only.
Smoke & Heat Detector Testing
One tester is designed for functional testing of both smoke detectors and heat detectors.
Electronic Smoke Generation
Uses atomized detector test fog liquid instead of an open-flame smoke source, helping reduce soot and residue during routine detector testing.
Electric Heat Testing
Provides a heat outlet temperature of more than 80°C for functional testing of suitable heat detectors.
Blow / Fan Function
Integrated airflow function helps disperse residual test fog after smoke testing.
Adjustable Extension Pole
Stainless-steel threaded connecting rods are approximately 0.5 m per section, allowing the tester length to be configured according to detector height.
2.5 m / 3.5 m Standard Configuration
Standard assembled length is available in 2.5 m or 3.5 m, depending on kit configuration.
Rechargeable Battery System
Powered by a DC 7.4 V, 2200 mAh rechargeable battery rod with dedicated DC 8.4 V, 1000 mA charger.
Portable Field Kit
Tester head, extension rods, battery rod, detector test fog liquid, syringe, charger and tools can be stored together in the supplied aluminium carrying case.
2.5 m assembled configuration
or
3.5 m assembled configuration
The quantity of approximately 0.5 m threaded connecting rods depends on the selected kit configuration.
| Parameter | Specification |
|---|---|
| Product Name | 2-in-1 Smoke & Heat Detector Tester |
| Model | AT-SH-T02 |
| Test Functions | Smoke / Heat / Blow (Fan) |
| Operation Method | Manual buttons / switches |
| Smoke Test Capacity | 450–800 detector tests per full charge |
| Heat Test Capacity | >300 detector tests per full charge |
| Heat Output Temperature | >80°C |
| Test Smoke Source | Atomized detector test fog liquid |
| Battery Capacity | 2200 mAh |
| Battery Voltage | DC 7.4 V |
| Charger Output | DC 8.4 V, 1000 mA |
| Tester Head Material | Anodized aviation aluminium + stainless steel |
| Connecting Rod Material | Stainless steel, threaded connection |
| Connecting Rod Section | Approx. 0.5 m per section |
| Standard Assembled Length | 2.5 m / 3.5 m, depending on kit configuration |
| Carrying Case Material | Aluminium |
| Explosion-Proof | No |
| Certification | — To be confirmed |
以上核心参数全部来自手册技术规格表。 ANWETECH_AT-SH-T02_2in1_Smoke_H…
The tester uses atomized detector test fog liquid for functional smoke detector testing.
Approximately 5–6 mL of detector test fog liquid is added per refill. During a typical smoke detector test, the manual recommends applying smoke for approximately 3–5 seconds, then allowing the fire alarm control panel to complete its polling or verification cycle before confirming the alarm.
In heat mode, the tester provides electrically generated heated airflow through the tester outlet.
The tester head should be positioned close to the detector sensing element without striking or damaging the detector. Heat should be applied only for as long as necessary for the detector to respond.
After smoke testing, the blow function can be used to clear residual test fog around the detector sensing chamber.
This can help reduce repeated alarms caused by test fog remaining around the detector after testing.
The AT-SH-T02 is intended for functional testing of installed:
The tester verifies detector response to controlled smoke or heat stimulus and confirms that the connected fire alarm system receives the resulting alarm signal. ANWETECH_AT-SH-T02_2in1_Smoke_H…
Important: The AT-SH-T02 is a maintenance and test instrument. It does not replace the detector manufacturer's required inspection method, system commissioning procedure or applicable local fire alarm standard.
Standard Kit Includes:
| Component | Typical Quantity |
|---|---|
| Tester Head | 1 pc |
| Battery Rod with Start Switch | 1 pc |
| 0.5 m Connecting Rods | Quantity depends on 2.5 m / 3.5 m kit |
| Detector Test Fog Liquid | 1 bottle |
| Syringe / Injector | 1 pc |
| Dedicated Charger | 1 pc |
| Screwdriver / Sealing-Screw Tool | 1 pc |
| Aluminium Carrying Case | 1 set |