The AT-F102 Multi-Loop Fire Alarm Control Panel by Anwetech is an intelligent EN54-certified addressable fire alarm system featuring a 7-inch LCD touch screen, multi-loop configuration, and advanced network capability. It supports up to 1,296 addressable points and 5,000 zones, ideal for commercial buildings, data centers, hospitals, and industrial facilities.
The AT-F101 is a compact addressable fire alarm control panel compliant with EN 54-2 & EN 54-4 standards.It supports 1 loop with up to 120 addressable devices, features a 4.3-inch color LCD, 16-zone indicators, and CAN bus networking for up to 20 panels.
The AT-F204 is a 4-zone conventional fire alarm control panel designed for small to medium-sized buildings, providing reliable fire detection, alarm control, and system monitoring for safety-critical applications.
The AT-SH101 Combined Smoke and Heat Detector is an intelligent addressable detector designed to provide dual fire detection through photoelectric smoke sensing and temperature sensing.It combines the sensitivity of smoke detection with the reliability of heat detection, ensuring early warning in a wide range of fire conditions.
The AT-H101 Addressable Heat Detector is designed for reliable and precise temperature-based fire detection in industrial and commercial environments.It operates through a two-wire, non-polar bus system, equipped with a high-performance microprocessor that continuously monitors ambient temperature and communicates real-time data to the fire alarm control panel.
Battery operated combination smoke and carbon monoxide (CO) alarm with high-sensitivity photoelectric smoke sensor and electrochemical CO sensor. Loud 85 dB alarm with red LED flash, LCD display for smoke and CO concentration, low-battery warning and auto self-check, ideal for indoor residential and small commercial applications
AT-DM102 is an addressable input/output module designed for loop-type fire alarm control panels. It provides monitored input and volt-free relay output for fire alarm system integration.
AT-SS102 is an EN54-3 Type A addressable sounder beacon that provides combined audible and visual fire alarm warning. With DC24V supply, low power consumption and up to 104dB(A) output
Battery operated photoelectric smoke alarm with built-in NO/NC relay contacts. Powered by 2 × AA batteries (DC 3 V), suitable for use as both a standalone audible alarm and as a smoke detector input for small control panels and equipment cabinets.
AT-B01 is a reflective linear beam smoke detector designed for large open spaces. It supports 5–100m detection distance, built-in laser alignment, 8 sensitivity levels, fire/fault relay outputs, RS485 communication, and automatic light compensation.
ANWETECH AT-S229 is a 220-240V mains powered photoelectric smoke alarm designed for household and similar residential applications. It supports single-station use or interconnection of up to 24 units, and features a 9V replaceable battery backup, test and hush button, red and green LED indicators, and low battery warning for reliable daily fire protection.
Early-warning air-sampling smoke detection for mission-critical spaces
Fast response, continuous airflow monitoring
Flexible pipe network, easy commissioning & maintenance
EN 54-20 compliant 1 zone 2 zone 4 zone optional
The AS01 Stand-alone Laser Cavity Aspirating Smoke Detector is an active air sampling smoke detection system designed for very early fire warning. It draws air samples through a sampling pipe network and analyzes smoke particle concentration inside a laser chamber. With high sensitivity, five alarm levels, RS485 communication and multiple relay outputs, it is suitable for data centers, electrical rooms, warehouses, cable tunnels, battery rooms, laboratories, museums and other critical facilities.AS01 Aspirating Smoke Detector | Laser Early Warning Fire Detection
The main interface displays real-time monitoring of particulate matter real-time value
characteristic gas real-time values (H2, CO, CH4, VOC)
temperature and humidity real-time values in the environment
The main interface displays real-time monitoring of particulate matter real-time valuecharacteristic gas real-time values (H2, CO, CH4, VOC)temperature and humidity real-time values in the environment
The AT-EB02 Explosion-Proof Reflective Beam Smoke Detector is a linear optical smoke detection solution designed for large open spaces and hazardous environments. Featuring integrated transmitter and receiver design, automatic environmental compensation, and high immunity to interference, it delivers reliable early smoke detection for industrial and commercial fire protection applications.
ANWETECH FD02-UVIR3 is a UV/IR flame detector designed for fast and reliable open flame detection in hazardous industrial areas. With long-range detection up to 60 m, 120° wide field of view, explosion-proof construction, IP66/IP67 protection and optional weather protection cover, it is suitable for outdoor and harsh industrial environments such as oil & gas facilities, chemical plants, fuel storage areas and diesel rooms.
The ANWETECH AT-ESS02 Explosion-Proof Sounder Beacon is a non-addressable audible and visual alarm designed for hazardous gas and dust environments. It provides clear sound and LED visual warning signals when activated by a fire alarm control panel or manual call point.
The ANWETECH AT-ESS01 Explosion Proof Strobe Sounder is designed for hazardous areas requiring both audible and visual fire alarm warning. It provides a 90–110dB fire alarm tone and 360-degree LED visual indication when activated by a fire alarm control panel or alarm circuit.
AT-ES01 is an ATEX explosion-proof point photoelectric smoke detector designed for hazardous gas and combustible dust environments. It supports DC24V non-polarized power input and provides Normally Open and Normally Closed relay contact outputs for connection with conventional fire alarm control panels or input modules.
The AT-EM01 Explosion-Proof Manual Call Point is designed for use
in Zone 1 & 2 gas and Zone 21 & 22 dust hazardous areas.
Atex approved it provides reliable manual activation of fire pumps
or alarm systems in industrial environments.
The AT-EG01 Explosion Proof Gas Detector provides
continuous real-time monitoring of flammable and toxic gases
it features a die-cast aluminum housing
multiple output options (4–20mA, RS485, relay)
and intuitive calibration functions for reliable industrial protection
Explosion-proof fire alarm bell for Zone 1 & Zone 2 hazardous areas
(Exdb IIC T6 Gb / Extb IIIC T80 °C Db)
95–110 dB output, IP65 protection, available in DC24 V or AC220 V.
ANWETECH AT-LD101 is a locating leak detection alarm module designed for water and conductive liquid leak monitoring. It works with sensing cable up to 1500 m, reports the leak position in meters on the LCD, and provides alarm and fault relay outputs plus RS-485 MODBUS-RTU communication for integration with BMS or fire systems
The ANWETECH AT-LS102 Liquid Hydrocarbon Fuel Sensing Cable is designed for distributed detection of liquid hydrocarbon fuel leakage. It can detect fuel anywhere along the cable length while remaining non-responsive to water, making it suitable for fuel storage tanks, trenches, pipelines, cable routes and industrial fuel leak monitoring areas.
ANWETECH AT-LS101 is a locating water leak detection cable system designed for data centers, warehouses, smart buildings, museums, archives and equipment rooms. When conductive liquid contacts the sensing cable, the module provides fast alarm output and displays the leak position in meters.
AT-LH is a digital linear heat detector system using fixed-temperature heat sensing cable for long-distance fire detection along cable trays, conveyors, tunnels and industrial equipment. UL Listed versions are available for 68°C, 88°C, 105°C and 138°C; the 180°C cable is available as a non-UL high-temperature option.
The TJ101 fire telephone panel is a wall-mounted two-bus fire fighters telephone master that works with fire telephone extensions and jacks to provide reliable emergency communication in buildings. It supports up to 126 addresses, SD-card address book import, call recording and event logs, and is designed according to GB16806 fire linkage system requirements.
High-power two-in-one fire telephone & emergency voice panel combining TJ101 fire telephone switchboard with 350W FR105 emergency broadcasting host. Designed for medium and large buildings that require longer loudspeaker lines and more zones, providing reliable fire telephone communication and powerful emergency voice broadcasting in a single wall-mounted panel.
FR104 is a 150 W wall mounted fire emergency voice control panel designed for integration with fire alarm linkage systems. It provides emergency voice broadcasting, MIC paging, USB / MP3 and AUX audio input with 120 V constant-voltage speaker output and automatic fault monitoring, ideal for small and medium-size building fire emergency broadcasting and voice evacuation systems.
The AT-F321 is a 4-zone conventional fire alarm and automatic gas extinguishing control panel designed for fixed fire suppression systems. It complies with EN54-2/4 and EN12094-1, providing supervised detection circuits, notification outputs, extinguishant release outputs and adjustable time delays for safe, staged agent discharge.
ANWETECH AT-F325 is a key-operated manual release key switch designed for fire suppression and extinguishing systems. It features a normally closed (N/C) contact arrangement, key-turn reset, red 40 mm operator head and M22 panel mounting, making it suitable for extinguishing control panels and supervised release circuits.
ANWETECH AT-F326 is a 24VDC illuminated abort switch designed for fire alarm and releasing systems. It features a green illuminated push button, normally open (N/O) contact output, M22 mounting thread and compact panel-mount design, making it suitable for extinguishing control panels and releasing system abort circuits.
FK-5-1-12 clean-agent total flooding system for mission-critical spaces. The agent is clean, electrically non-conductive, leaves no residue, and is stored as a liquid and discharged as a vapor. Typical designs use 25 bar or 42 bar super-pressurized cylinders with automatic or manual/pneumatic actuation, compliant with NFPA 2001 design practices.
ANWETECH Two-Cylinder Cabinet Type FM200 System is a pre-engineered clean agent fire suppression solution with two HFC-227ea agent cylinders installed inside one cabinet. The system integrates the cylinders, high-pressure hoses, nozzles, pressure gauges, solenoid actuators, and signal feedback device into a compact fire extinguishing cabinet. It can be installed directly inside the protected area without a separate cylinder room.
HFC-227ea FM200 total-flooding fire extinguishing system is an engineered clean-agent solution designed for critical areas such as data centers and control rooms. It uses UL-listed HFC-227ea agent (Heptafluoropropane), providing fast, residue-free fire suppression with zero ozone depletion potential.
